Teguex
®
Expansion Joints
DN 25-DN 600
Colour Inner Outer Max temp. Applications
Label tube cover °C
Double Spec. Spec. 130° C Hot water, vapour, hot air, etc. at
Red HP EPDM EPDM temperatures up to 130°C.
Materials
Pressure Temperature DN 25 - DN 200 - DN 350 -
DN 150 DN 300 DN 600
Max. working pressure 100°C 16 bar 10 bar 10 bar
130°C 10 bar 6 bar 6 bar
Test pressure 20°C 25 bar 15 bar 15 bar
Burst pressure 20°C >60 bar >60 bar >30 bar
Pressure rating
Applications
Teguex HP are suitable for a variety of applications
including heating systems, industrial plants with hot
water, vapour and hot air, etc. They :
Compensate for thermal elongation and
misalignment.
Isolate vibrations, dampen noise and pressure surges
in connection with engines, pumps, turbines, etc.
The expansion joint is resistant to acids, alkalis,
alcohols, esters and ketones.
Note: D
o not use in connection anti-corrosive
agents or other media based on oil.
Design
The Teguex HP expansion joint is composed of a
special internal EPDM rubber compound, suitable
for high temperature applications without hardening.
The Aramid fabric reinforcement is resistant to
hydrolysis which will endure high temperatures in
combination with moisture and water. This ensures a
long service life with retained properties.
Standard lengths 130/150/200 mm.
Swivel anges.
Type U
Standard unit for axial, lateral
and angular movements.
Type L
Unit with tie bars for
lateral movements.
Type A
Unit with hinges to take up angular
movements in one plane.
T
eguflex A.eps
T
eguflex L.eps
Type L1
Rubber bushes
for vibrations.
Type L2
Spherical washers
for a smother movement.
T
eguflex U
For high temperature oil service, see Type HO Double Yellow (110 °C).
Double Red Band
HP
Note: Maximum movements do not apply simultaneously. Other lengths also available.
Optional equipment
Vacuum rings, Flame guard etc. are available.
Approvals
Distributor:
Teguex P HP BL 130/200 DN 25-DN 600
Flange qualities
zinc plated steel anges are supplied as
standard. However other types are available:
stainless steel, hot dipped galvanized, etc.
Flange mesurements
DN 32-DN 600 DIN 2501 PN 6/10/16
(see Flange dimension table for details)
Other ange standards available. Please ask.
Dimensions and movements
Permissible movements Max. vacuum Weight
Eff.cross- W/o With Incl. Incl.
sectional Com- Elon- Lateral An- support support ange tied
DN BL area (E) (F) pression gation gular ring ring anges
mm mm Q(cm
2
) mm mm mm mm mm bar bar kg kg
25/32 130 35 77 72 30 20 20 35° 0.8 1.0 3 4
40 130 45 85 80 30 20 20 35° 0.8 1.0 3 5
50 130 56 95 90 30 20 20 35° 0.7 1.0 4 5
65 130 79 110 105 30 20 20 30° 0.6 1.0 5 7
80 130 104 125 120 30 20 20 30° 0.5 1.0 6 8
100 130 136 145 140 30 20 20 25° 0.5 1.0 7 10
125 130 188 170 165 30 20 20 25° 0.4 1.0 8 12
150 130 254 195 190 30 20 20 15° 0.3 1.0 10 16
200 130 415 245 240 30 20 20 15° 0.3 1.0 15 23
250 130 615 295 290 30 20 20 10° 0.2 1.0 20 33
300 130 855 345 340 30 20 20 10° 0.2 1.0 24 44
350 200 1290 430 425 30 20 20 10° 0.2 1.0 32 54
400 200 1628 475 470 30 20 20 10° 0.2 1.0 45 71
450 200 2054 532 510 30 20 20 10° 0.2 1.0 52 81
500 200 2546 590 560 30 20 20 10° 0.2 1.0 63 100
600 200 3466 685 655 30 20 20 6° 0.2 1.0 95 140
Teguflex P matt
B
BL
d
DN
F
C
D
E
97/23/CE
ISO 9001 ISO 14001
ABS
Interflex Hose & Bellows Ltd. € www.integflex.co.uk
Ludlow Eco Park € Ludlow € Shropshire € SY8 1FF € United Kingdom
Tel: +44 (0)1584 878500 € Email: teguflex@integflex.co.uk
Note: Maximum movements do not apply simultaneously. Other lengths also available.
Optional equipment
Vacuum rings, Flame guard etc. are available.
Approvals
Distributor:
BL 150/200 DN 25-DN 600
Flange qualities
zinc plated steel anges are supplied as
standard. However other types are available:
stainless steel, hot dipped galvanized, etc.
Flange mesurements
DN 32-DN 600 DIN 2501 PN 6/10/16
(see Flange dimension table for details)
Other ange standards available. Please ask.
Dimensions and movements
Permissible movements Max. vacuum Weight
Eff.cross- W/o With Incl. Incl.
sectional Com- Elon- Lateral An- support support ange tied
DN BL area (E) (F) pression gation gular ring ring anges
mm mm Q(cm
2
) mm mm mm mm mm bar bar kg kg
25/32 150 35 77 72 30 20 20 35° 0.8 1.0 3 4
40 150 45 85 80 30 20 20 35° 0.8 1.0 3 5
50 150 56 95 90 30 20 20 35° 0.7 1.0 4 5
65 150 79 110 105 30 20 20 30° 0.6 1.0 5 7
80 150 104 125 120 30 20 20 30° 0.5 1.0 6 8
100 150 136 145 140 30 20 20 25° 0.5 1.0 7 10
125 150 188 170 165 30 20 20 25° 0.4 1.0 8 12
150 150 254 195 190 30 20 20 15° 0.3 1.0 10 16
200 200 415 245 240 30 20 20 15° 0.3 1.0 15 23
250 200 615 295 290 30 20 20 10° 0.2 1.0 20 33
300 200 855 345 340 30 20 20 10° 0.2 1.0 24 44
350 200 1290 430 425 30 20 20 10° 0.2 1.0 32 54
400 200 1628 475 470 30 20 20 10° 0.2 1.0 45 71
450 200 2054 532 510 30 20 20 10° 0.2 1.0 52 81
500 200 2546 590 560 30 20 20 10° 0.2 1.0 63 100
600 200 3466 685 655 30 20 20 6° 0.2 1.0 95 140
Teguflex P matt
B
BL
d
DN
F
C
D
E
97/23/CE
ISO 9001 ISO 14001
Interflex Hose & Bellows Ltd. € www.integflex.co.uk
Ludlow Eco Park € Ludlow € Shropshire € SY8 1FF € United Kingdom
Tel: +44 (0)1584 878500 € Email: teguflex@integflex.co.uk
Teguflex W-HP
