Teguex
®
C
Expansion Joints
DN 25-DN 150
Colour Inner Outer Max temp. Applications
Label tube cover °C
Red EPDM EPDM 90° Hot water, cooling water with salt solutions,
chlorine solutions, esters and ketones.
Yellow ECO ECO 90° Water, salt solutions, alkalis, mineral oils,
vegetable or animal oils, oils aerosols,
butane or propane gas, etc.
Double Spec. Spec. 130° Hot water, vapour, hot air etc. at
red HP EPDM EPDM temperatures up to 130°C.
Materials
Note: Other materials available. Please ask.
Pressure Temperature Teguex Teguex HP
Pressure Pressure
Max. working pressure 70°C 10 bar 10 bar
90°C 6 bar 10 bar
130°C - 6 bar
Test pressure 20°C 15 bar 15 bar
Burst pressure 20°C >30 bar >30 bar
Pressure rating
Applications
For all types of industrial applications, such as
compressors, pumps, etc., as well as heating and
sanitary applications. They:
Compensate for thermal elongation and
misalignment.
Reduce vibrations, dampen noise and pressure surges
in connection with engines, pumps, compressors,
turbines, etc.
Design
Teguex C is a rubber expansion joint of very exible
construction. Because of its high convolution and
short building length, the expansion joint gets
outstanding noise and vibration absorbing properties,
as well as a high expansion absorption in all directions.
The swivel anges with threaded bolt holes and the
highly exible bellow
s, makes the mounting of the
expansion joint very simple.
Standard length 100 mm.
Swivel anges.
T
ype L
Unit with tie bars for
lateral movements.
T
eguflex L.eps
Type L1
Rubber bushes
for vibrations.
Type L2
Spherical washers
for a smother movement.
T
ype U
Standard unit for axial, lateral
and angular movements.
T
eguflex U
Dimensions and movements
Note: Maximum values do not apply simultaneously. Stiffness values tolerance: +/- 20%.
Other dimensions available. Please ask.
Optional equipment
Vacuum rings, Flame guard, etc. are available.
Permissible movements Max. vacuum Weight Spring Rates
Eff.cross- W/o With Incl. Incl. Com- Elon- Lateral
sectional Com- Elon- Lateral An- support support ange Tie-rod pression gation
DN BL area (E) (F) (d) pression gation gular ring ring ange Stiffness Stiffness Stiffness
mm mm Q(cm
2
) mm mm mm mm mm bar bar kg kg kg/cm kg/cm kg/cm
25/32 100 18/18 110 65 M16 30 20 30 15° 0.8 1.0 2.8 4.5 30 40 30
40 100 18 110 78 M16 30 20 30 15° 0.8 1.0 3.3 4.8 30 40 30
50 100 35 120 90 M16 30 20 30 15° 0.7 1.0 3.7 5.0 30 40 30
65 100 56 135 108 M16 30 20 30 15° 0.6 1.0 4.8 6.4 30 40 30
80 100 87 170 124 M16 30 20 30 15° 0.5 1.0 5.3 7.5 30 40 30
100 100 130 180 152 M16 30 20 30 15° 0.5 1.0 6.2 9.0 40 50 40
125 100 190 195 183 M16 30 20 30 15° 0.4 0.9 8.2 11.2 40 50 40
150 100 263 260 214 M20 30 20 30 15° 0.3 0.9 11.2 13.4 50 60 50
Distributor:
Teguex C BL 100 DN 25-DN 150
Flange qualities
zinc plated steel anges are supplied as
standard, however other types are available:
stainless steel, hot dipped galvanized, etc.
Flange measurements
DN 25-DN 150 DIN 2501 PN6/10/16
Note: Threaded holes! See table below (d).
(see Flange dimension table for details)
Other ange standards available. Please ask.
B
BL
d
DN
F
C
D
E
ISO 9001 ISO 14001
97/23/CE
Interflex Hose & Bellows Ltd. € www.integflex.co.uk
Ludlow Eco Park € Ludlow € Shropshire € SY8 1FF € United Kingdom
Tel: +44 (0)1584 878500 € Email: teguflex@integflex.co.uk
