TEL: (01584) 878500 FAX: (01584) 878115
STAINLESS
STEEL FLEXIBLE
PUMP CONNECTORS
IPC 40
Important Note: Please note that the information is to the best of our knowledge, true and accurate. We reserve the right to alter the specifications without notice. Since conditions under which
the products may be used are beyond our control, our recommendations are made without warranty or guarantee and we cannot be held responsible for misuse of products or information.
INTERFLEX HOSE & BELLOWS LTD.
LUDLOW BUSINESS PARK, LUDLOW, SHROPSHIRE. SY8 1XF.
TEL: (01584) 878500 FAX: (01584) 878115
OTHER PRODUCTS
•
Mason SUPERFLEX & SAFEFLEX Rubber Bellows Pump Connectors
•
Stainless steel flexible hose assemblies
•
Stainless steel expansion joints
•
PTFE hoses
•
Vibration eliminators
•
Custom-built rubber hose assemblies
•
Jacketted & heat-traced hose assemblies
•
Rubber & stainless steel fan coil hoses
•
Sole UK & Eire Agent for MERCER RUBBER Co. Rubber Expansion Joints
STAINLESS STEEL
PUMP CONNECTORS
FOR
•
HOSPITALS
•
SCHOOLS
•
HOTELS
•
LEISURE CENTRES
•
•
FACTORIES
•
FLATS
•
OFFICES
•
PRISONS
•
SHOPPING CENTRES
•
Maximum Working
Pressure* @ 120°C
bar
psi
Standard Length
mm
Screwed Flanged
Nominal
Bore Size
mm
in
Part
Number
IPC 12
IPC 20
IPC 25
IPC 32
IPC 50
IPC 65
IPC 80
IPC 100
IPC 125
IPC 150
IPC 200
12
20
25
32
40
50
65
80
100
125
150
200
1
/
2
3
/
4
1
1
1
/
4
1
1
/
2
2
2
1
/
2
3
4
5
6
8
220
220
250
250
300
300
350
350
-
-
-
-
150
150
200
200
250
250
250
300
300
300
350
350
86
65
61
42
37
28
24
18
17
10.5
10.5
6.5
1245
945
880
610
540
410
345
260
250
150
150
95
Non-Standard Lengths, and Larger/Smaller Sizes also available.
*
Also dependent on pressure rating of fitting.
APPLICATIONS
Interflex stainless steel pump connectors
have been optimumly designed for use in
pipework systems where pumps or
compressors are used - to suppress noise,
absorb vibration, to correct and accomm-
-odate for minor lateral misalignment or
thermal movement, and to adjust for any
building settlement.
CONSTRUCTION
Manufactured with AISI 321 stainless
steel corrugated tubing (to BS6501 Pt.1)
with AISI 304 stainless steel single
overbraid, & carbon or stainless steel end
fittings TIG welded-on. AISI 316 stainless
steel also available.
END FITTINGS
Screwed assemblies - Threaded BSP Taper
Male Hexagon or Half Barrel fittings.
Flanged assemblies - To BS10, BS4504 &
ANSI/ASA standards.
Other threads/flanges also available, including swivel
flanged ends.
INSTALLATION
Braided pump connectors are not designed to
absorb axial vibration !
Moderate Vibration / Noise
For maximum efficiency, the connectors should be
placed in both the suction and discharge lines, as
close as possible & at 90° to the vibration source.
They must be anchored at the pipework, on the end
away from the source.
Severe Vibration / Noise
Where excessive vibration is encountered,
best results will be obtained by installing
two connectors on each side of the source,
at right angles to each other.
Anchor
Anchor
Anchor
Stainless Steel Pump Connector
with BSPT Hex Male Ends.
Anchor
Anchor
Anchor
Pump
Pump
Pump
Stainless Steel Pump Connector
with Fixed Flange Ends.
Stainless Steel Pump Connector
with BSPT Half Barrel Male Ends.
